3D Printer (ABS)
From WikIRI
Contents |
3D Printer (ABS)
Dimension BST 1200es
Provider:
- Frater Aguilar S.L. design & manufacturing
- Simantec 2000 S.L.
- PIXEL SISTEMAS, S.L.
- Análisis y Simulación, S.L.
Manufacturer:Stratasys Inc. 7665 Commerce Way Eden Prairie, MN 55344-2080
- YEAR: 2008
- MODEL:BST 1200es
- MACHINE#:
- PART #: 150-00200
- SERIES#: P08173
- UDN:bst1200esP08173
- VOLTAGE: 230VAC
- HZ: 50/60
- PHASES: 2
- POWER: 2200W
- DIMENSIONS: 838x737x1143 mm
- WEIGHT: 148 Kg
- DATA ALTA:
- ORGANISME:
- INVENTARI#:
- RESPONSABLE PROJECTE:
CHARACTERISTICS
- Build Size: Maximum size 254 x 254 x 305 mm (10 x 10 x 12 inches)
- Materials: ABSplus plastic in standard natural, blue, fluorescent yellow, black, red, olive green, nectarine, or gray colors.
- Layer Thickness: 0.245 mm (.010 in.) or .33 mm. (.013 in.) of precisely deposited ABSplus and support material.
Documents
material virgen http://www.reprapcentral.com/vmchk.html
Software: ask the workshop staff
PRINTER (IP USED): 147.83.76.212
PC: 3DSCAN / USER: CONVIDAT / PASSWORD: CONVIDAT / IP USED 192.168.100.53
Building Tips
Note: "bumps" due to circumference material joint are generated Printed hole 2 comercial rod
- tight bond => difference (DiaHole-DiaRod=0.1mm) bumps not sanded
Printed Hole vs printed rod
- hole to rod with difference (DiaHole-DiaRod=0.15mm)
- free turn if bumps are sanded
- tight if bumps not sanded
Heat-up part
- increase properties
- Heat-up process
Errors
- Code 14, 117: desfase entre el material que la máquina 'piensa' que hay (según la lectura que hace del chip del cartucho) y el que hay realmente. Visto cuando en pantalla indicaba que quedaba un 1% y, al sacar el cartucho, éste estaba vacío.
Tools Available
- STL GUIDE LINES
- 3dscan d3p21kk
Maintenance
- Clean Burn Tips
- But tips in hot cooking oil (one hour of two)
- let cool down
- Mix vinegar and baking soda in a bowl to form a liquid paste
- Squeeze liquid in tips let it stay for 20 min
- wash with water - repeat till clean
